Lantronix mPACK for M110 Series Cellular Modems
Software Release Notes  
Version 2.5.0.0RC9
June, 2020
Copyright 2020, Lantronix

Release notes are also available on the Lantronix web site (www.lantronix.com) 
and via anonymous FTP from ftp.lantronix.com.  Contact Lantronix or your 
reseller for more information. 

This document describes the Lantronix mPACK firmware release 2.5.0.0RC9

===============
RELEASE SUMMARY
===============
Previous Release: 2.4.0.0
Current release: 2.5.0.0RC9, June 2020

==================
PRODUCTS SUPPORTED
==================
V2.5.0.0 supports the M111, M114, M115 modems. M113 is not supported.

=================
FIRMWARE RELEASES
=================
binary file: http://updates.d2sphere.com/mPack/m110/released/mpack_m110_2.5.0.0RC9_2020052701-Z171c5a94.bin
teraterm update script: http://updates.d2sphere.com/mPack/m110/released/mpack_m110_2.5.0.0RC9_2020052701-Z171c5a94.ttl

The firmware can be updated via Serial port using the teraterm script, or over the
air using the AT commands below:
AT#WEBUPDATE="/mPack/m110/released/mpack_m110_2.5.0.0RC9_2020052701-Z171c5a94.bin",80,"updates.d2sphere.com"

The customers having devices consisting Mpack application version 'mpack_m110_2.1.1'.The firmware can be updated over the
air using the AT commands below:
AT#WEBUPDATE="/mPack/m110/released/mpack_m110_2.5.0.0RC9_2020052701-Z171c5a94.bin,80,"updates.d2sphere.com"

Be aware that updating the firmware over the air will use data and cellular connection,
this will take time. If needed downgrading firmware versions is supported.


=====
NOTES
=====

============
NEW FEATURES
============
None

=========
BUG FIXES
=========
MPK-3: Added IO PIN 2 option for AT#MSGPER
MPK-119: Added new IDs for APN(64Bytes), USERNAME(64B),PASSWORD(64B)at the end of existing flash config sector.
MPK-149: Enabled Keep Alive feature for TCP.
MPK-191: Fixed AT#SETRTC=2,1 command not resetting date 
MPK-207: Irrespective of modem mode (command or data) AT+ command should be allowed to execute from USB port(if USBATCOM=1)
MPK-213: Added Action to reactivate Data after ping failure data disconnect.
MPK-216: Resolved issue of +++ appering in TCP connection data.
MPK-221: Resolve issue of debug traces appering in TCP connection.
MPK-223: GPIO reports are now sent on D2sphere server with displaying the correct time
MPK-224: Fixed periodic event trigger on enable causing incorrect input mode in report
MPK-209: Green LED now functioning i.e Blinking when CSQ is between 4 to 10

============
KNOWN ISSUES
============

1. M113 is not supported by this version.


====================
DOCUMENTATION ERRATA
====================
None