===============================================
Lantronix mPACK for M110 Series Cellular Modems
Software Release Notes
24-November-2020
Copyright 2020 (c) Lantronix Inc.
===============================================

===============
RELEASE SUMMARY
===============
RELEASE VERSION: 2.7.0.0

RELEASE DATE:    11/24/2020

RELEASED FILES: mpack_m110_2.7.0.0_2020112401-Zb846ccfb.bin
				mpack_m110_prod_2.7.0.0_2020112401.bin
				mpack_m110_2.7.0.0_2020112401-Zb846ccfb.ttl

==================
PRODUCTS SUPPORTED
==================
V2.7.0.0 supports the M111, M114, M115 modems. M113 is not supported.

==============
RELEASE STATUS
==============
  Alpha         ( )
  Beta          ( )
  Supplemental  ( )
  Production    (X)
  Test          ( )

============
NEW FEATURES
============
o MPK-253 M114: Add support for LARA-R204-02B

=========
BUG FIXES
=========
o MPK-80 Stop/Disable option not working
o MPK-136 at#smsat does not work as expected. M110 does not send the answer to AT command by SMS.
o MPK-198: Resolved issue of periodic messages
o MPK-199: Sends blank ACK SMS for AT#RESET command send on SMS and device doesn't reset on receiving the command
o MPK-206 RTC doesn't reflect changed date immediately after time 00:00:00
o MPK-228 Not connecting to the secondary IP in AutoTCP
o MPK-229 Sends periodic message reports continuously non stop on server if interval is set as 0 in Transmode 6.
o MPK-230 AT+CONFIGDEL command should factory reset U-block module.
o MPK-231 "+++" command not getting device's serial port out of data mode when device connects TCP with AT#OTCP command.
o MPK-234 "OK" string comes on serial port when tcp connection established through AUTOTCP gets break.
o MPK-236 AUTOTCP keeps disconnecting/reconnecting 
o MPK-237 Not able to start On Demand TCP (OTCP) again after stopping using AT#OTCP=0 command.
o MPK-239 TCP transfer speed slower than before.
o MPK-242 Successive AUTO TCP session not occurring , reboot needed
o MPK-243 Configured data has been cleared if the modem has been shut down completely

========================================================================================================================
===========
HISTORY
===========
RELEASE VERSION: 2.5.0.0RC9 
RELEASE DATE:    June 2020
===========================
PRODUCTS SUPPORTED
==================
V2.5.0.0RC9 supports the M111, M114, M115 modems. M113 is not supported.
============
NEW FEATURES
============
o None.
=========
BUG FIXES
=========
o MPK-3: Added IO PIN 2 option for AT#MSGPER
o MPK-119: Added new IDs for APN(64Bytes), USERNAME(64B),PASSWORD(64B)at the end of existing flash config sector.
o MPK-149: Enabled Keep Alive feature for TCP.
o MPK-191: Fixed AT#SETRTC=2,1 command not resetting date 
o MPK-207: Irrespective of modem mode (command or data) AT+ command should be allowed to execute from USB port(if USBATCOM=1)
o MPK-213: Added Action to reactivate Data after ping failure data disconnect.
o MPK-216: Resolved issue of +++ appering in TCP connection data.
o MPK-221: Resolve issue of debug traces appering in TCP connection.
o MPK-223: GPIO reports are now sent on D2sphere server with displaying the correct time
o MPK-224: Fixed periodic event trigger on enable causing incorrect input mode in report
o MPK-209: Green LED now functioning i.e Blinking when CSQ is between 4 to 10

============
KNOWN ISSUES
============
o None.